iGET SECURITY P21 - wireless magnetic detector for iGET SECURITY M3B and M2B

iGET SECURITY P21 is a simple extension of the basic iGET SECURITY M2B alarm set. It is a wireless motion detector that will be especially appreciated by owners of iron gates, doors and windows, where detection is more difficult due to the iron surface. It is designed for all places where guarding is required by opening the magnetic contact, i.e. responds when opened. For better visibility, it contains signal LEDs - red, which indicates the contact is open, and yellow, which indicates a low battery and the need to replace it. In addition, it boasts relatively low power consumption. The battery lasts up to 1 year depending on the number of times it is opened.

Using the iGET SECURITY P21 wireless magnetic detector

The detector reacts when doors, windows, garage doors and the like are opened. It can do this thanks to the detection system based on the separation of two magnetically connected parts. So you simply place one of them on the door frame and the other on the door itself. As soon as they are more than 2 cm apart, the contact is opened and a signal is immediately sent towards the alarm.

Broadcast Frequency:
433 MHz

Operating temperature:
-20 °C ~ +50 °C

Operating Humidity:
5 % ~ 90 %

Supply voltage:
1× battery 12 V, type 27 A

Operating current:
65 mA

Climate current:
0.01 mA

Open contact:
at a separation of 2 cm

Signal range to the central unit:
Up to 80 m in direct visibility