Naturehike Bleik tent for 3 persons, blue
Naturehike Bleik tent for 3 persons, blue
The Naturehike Bleik is a two-layer, 3-person tent with a classic igloo design. Two intersecting poles create a self-supporting structure, so the tent stays upright even without being fully secured with pegs. This design makes it easy to pitch on hard or uneven ground. Two separate entrances provide access from both sides, and extendable awnings create a sheltered area in front of the tent.
3
Capacity
3000mm / 2000mm
Flysheet / groundsheet water column
125 × 290 × 240cm
Tent dimensions (H × W × D)
Double-skin
Number of layers
3kg
Weight
Key features of the Naturehike Bleik 3-person tent, blue
- The Naturehike Bleik tent has a self-supporting igloo design
- Two intersecting poles made from 7001 aluminium alloy
- Two separate entrances for enhanced comfort
- Extendable awnings in front of the entrances offer protection from rain and sun
- Flysheet made of 210T polyester with a PU coating
- Groundsheet made of 150D polyester
- Four-sided ventilation ensures air flows through the tent
- Mesh netting keeps unwanted pests out of the tent
- Internal pockets and a ceiling hook
Bleik tent materials and weather protection
The Bleik tent's flysheet is made from tear-resistant 210T polyester and features a water-resistant PU coating. The 150D polyester groundsheet reduces moisture penetration from the ground. The support poles use a 7001 aluminium alloy. The awnings can be rolled out in front of the entrances to protect your gear from the sun or rain.
Ventilation and internal features of the Naturehike Bleik tent
Four-sided ventilation promotes airflow through the Bleik tent and reduces the build-up of condensation. The mesh sections of the inner tent prevent insects from getting inside. You can store small items in the internal pockets and hang a light from the hook on the ceiling.
Additional information
- Inner tent dimensions: 230 × 180 × 120cm
- Packed dimensions: 44 × 18 × 18cm
- Number of entrances: 2
- Colour: blue
Accessories
- Flysheet
- Inner tent
- Aluminium poles
- Pegs
- Guy ropes
- Carry bag
Water column
Indicates the resistance of the fabric and seams to water penetration. It specifies the amount of water the material can withstand before it starts to leak. The higher the value in mm, the more resistant the tent is. Every tent should have a flysheet with a water column of at least 2000mm, which is approximately the pressure exerted by a raindrop travelling at 80–90 km/h. To survive a storm unscathed, a water column of at least 3000mm is a safer bet. For the groundsheet, a water column of 5000mm is recommended for general hiking. For more demanding conditions, choose a groundsheet with a water column of 8000–10000mm.Specifications
Type
Tent pitching
Features
Unpacked dimensions
Packed dimensions
Accessories
FOR X-TREME DISTRIBUTION s.r.o, Čisovice 128 252 04, [email protected], +420725055051
ProCode s. r. o. Josefy Kolářové 376/11, 370 005 České Budějovice, [email protected], +420 601 539 688
Specifications can be changed without notice. Images are for illustrative purposes only.
