Ako zmeniť koncovku usb-b(printing) na usb-c ? Dobré obchody ponúkajú nejaký servis, vrátenie tovaru, prípadne ak by to bolo možné upgrade na usb 3.2 Na internete sú yt koumáci zarábajúci na tom, že to je možné prerobiť, pretože digitálna komunikácia, prakticky však do toho vstupujú usb-c štandardy, takže recyklácia je niekedy+++ vhodnejšia. K dostaniu sú adaptéry na hlavicu, ktoré zmenia obidve koncovky(usb-a a aj usb-b(printing)) na usb-c, ale to nemusí vyhovovať nárokom spotrebiteľov. Ako postupovať v prípade potreby upgrade, napríklad zmenou dinov tlačiarne aby mala zásuvku na zasunutie jednej strany kábla a druhá pôjde do počítača, čím sa nenaruší pôvodná funkčnosť a určenie kábla ? Bude takéto niečo vyhovovať nárokom, ak sa zmení určenie takéhoto prerobeného kábla ? Pretože ani adaptéry na zmenu usb-b na usb-c neponúkate a neponúkate ani servis takýchto určení... Robia to niekde okrem yt, aby sa dodržali a zabezpečili testovacie a pracovné podmienky, upgrade/down náklady?
AXAGON ADR-215B USB 2.0 active connecting / repeater cable USB-A -> USB-B, 15m
AXAGON ADR-215B USB 2.0 active connecting / repeater cable USB-A -> USB-B, 15m
Connect your printer, scanner, plotter, and other USB-B devices to your computer with the 15m AXAGON ADR-215B active extension USB 2.0 cable. This active USB repeater cable boosts the passing signal, letting you connect USB-B devices over a much greater distance than a passive cable allows. You can extend the range even further by using an AXAGON ADR-210 USB extension cable, for example.
A great advantage of the ADR-215B cable is the integrated connector for auxiliary power. While USB bus power is sufficient in most cases, devices with higher power consumption may struggle over longer distances. In these situations, auxiliary mains power solves the problem.
The exceptionally compact body of the repeater cable ensures hassle-free installation in trunking or cable management systems. High-quality shielded cabling guarantees fast communication speeds and minimal interference.
Input:
- USB 2.0 for computer connection
- USB Type-A (M) male connector
Output:
- USB 2.0 for connecting a remote USB device
- USB Type-B (M) male connector
- 480/12/1.5Mbps transfer rates (high/full/low speed)
Power supply:
- USB bus power for the cable and connected devices (bus-power mode 5V–500mA).
- USB bus power is sufficient for most connected USB devices, requiring no external power supply.
- The active part of the cable features a connector (Ø 3.5x1.3mm outer/inner diameter) for an auxiliary 5V/1–2A external power supply.
- A 1.2m USB-A to 3.5mm jack power cable is included in the package. The cable allows powering from a standard mobile phone charger with a 5V/min. 1A USB-A output, such as the AXAGON ACU-DS16.
Other features:
- Fully compatible with USB 2.0 and backward compatible with USB 1.1.
- Full Plug and Play and Hot Plug support.
- Two LEDs indicating power connection and USB device connection.
- A standard passive USB cable can be used after the active USB cable.
- Active part dimensions are 95x22x13mm, cable length is 15m.
- Weight 517g.
Supported operating systems:
- MS Windows XP/Vista/7/8/8.1/10/11 and later, Windows Server 2003/2008/2012/2016/2019 and later (all 32-bit and 64-bit versions of Windows OS supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
- Note: Drivers are included with the supported operating systems and install completely automatically. No other drivers are needed or available.
Package contents:
- 15m active USB 2.0 A-M > B-M cable,
- USB-A/3.5mm power cable,
- multilingual manual.
Specifications
Use
Male connectors
Connector
Type and number of connectors
Standards
Cable construction
Features
RealQ s.r.o. Železná 663/5 619 00 Brno Česká republika https://www.axagon.eu/cs/contact
Specifications can be changed without notice. Images are for illustrative purposes only.
