Bude AXAGON ADR-210 USB 2.0 aktivní prodlužovací kabel (USB A -> USB A, 10 m) fungovat, když ho zapojím do PC a na druhý konec připojím USB kabel vedoucí do PS4 ovladače?
AXAGON ADR-310 USB 3.0 active extension / repeater cable USB A -> USB A, 10m

AXAGON ADR-310 USB 3.0 active extension / repeater cable USB A -> USB A, 10m
The AXAGON ADR-310 10-metre active USB 3.2 Gen 1 extension cable is the ideal solution for connecting your computer to a USB device such as a mouse, keyboard, webcam, printer, scanner, plotter, and more. This active USB repeater cable amplifies the signal, allowing you to connect a USB device over a significantly longer distance than a passive cable would permit. If needed, you can connect several cables in series to extend its reach even further. Thanks to the USB 3.2 Gen 1 (formerly USB 3.0) interface, you can enjoy data transfer speeds of up to 5Gbps. This makes the cable suitable for devices that require higher speeds, such as backup systems, NAS data storage, and others.
A major advantage of the ADR-310 cable is its integrated connector for auxiliary power. In most cases, power from the USB bus is sufficient, but for devices with higher power consumption over longer distances, USB power can be inadequate. In these situations, auxiliary power from the mains can solve the problem.
The exceptionally compact body of the repeater cable allows for seamless use in electrical trunking or cable management systems. The high-quality shielded cable guarantees high communication speed and minimal unwanted interference.
Input:
- USB 3.2 Gen 1 for connecting to a computer
- USB Type-A (M) male connector
Output:
- USB 3.2 Gen 1 for connecting a remote USB device
- USB Type-A (F) female connector
- Transfer rates of 5000/480/12/1.5Mbit/s (super/high/full/low speed)
Power:
- The cable and connected devices are powered via the USB bus (bus-power mode 5V–500mA).
- For most connected USB devices, power from the USB bus is sufficient, and no additional power is needed.
- The active part of the cable includes a Micro USB connector for additional external power of 5V/1–2A.
- A 1.2m USB A-M / Micro USB power cable is included in the package. This cable allows for powering from a standard mobile phone charger with a USB-A output of 5V/min. 1A, such as the AXAGON ACU-DS16.
- When the repeater cable is powered by a power adapter, you can also connect an external 2.5" drive without needing a separate power supply for the drive.
- For longer USB routes with several repeater cables connected in series, the USB bus power may be insufficient even for USB devices with lower power consumption than an external 2.5" drive. In this case, boosting the power by connecting a power adapter can also help.
Other features:
- Fully compatible with USB 3.2 Gen1 (USB 3.0) and backwards compatible with USB 2.0 and USB 1.1.
- Full Plug and Play and Hot Plug support.
- Two LEDs indicate power connection and USB device connection.
- A standard passive USB cable can also be used after the active USB cable.
- Dimensions of the active part are 75×24×13mm, with a 10m cable length.
- Weight 408g.
Supported operating systems:
- MS Windows XP/Vista/7/8/8.1/10/11 and later, Windows Server 2003/2008/2012/2016/2019/2022 and later (all 32-bit and 64-bit versions of Windows OS are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
- Note: Drivers are included with the supported operating systems and install automatically. No other drivers need to be installed, and none are available.
Package contents:
- USB 3.0 A-M > A-F active cable, 10m long,
- USB-A / Micro USB power cable,
- multilingual manual.
Specifications
Use
Male connectors
Connector
Type and number of connectors
Standards
Cable construction
Features
Specifications can be changed without notice. Images are for illustrative purposes only.

