Včera jsem dle přiloženého schéma zapojil časový spínač CS3-4B. Vše fungovalo správně, až na: po zhasnutí svěla světlo poblikávalo až do pozdějšího vypnutí větráku. Chybí detailní popis zařízení a konkrétní technická data, ale na kartičce přiložené ke zboží jsem nalezl značku s popiskou LED, která je přeškrtlá. Usuzuji tedy, že tento spínač není vhodný pro LED osvětlení (což je samozřemě náš případ) a vysvětlovalo by to tedy výše uvedený problém. Prosím o potvrzení doměnky, případně o doporučení zařízení stejných funkcí vhodného pro LED osvětlení. Děkuji Wohlgemuth
Elektrobock CS3-4B

- Reviews 2
- Help and manuals 1
- Specifications
- Photos & Videos 4
- Alternatives 7
- Accessories and suggested products
Elektrobock CS3-4B
The Elektrobock CS3-4B timer is designed for switching fans. It is equipped with the possibility of mounting under the switch. Its function is to delay the fan on and off depending on the lighting. Load switching occurs 30 seconds to 10 minutes after the lighting is switched on. The adjustment is done by trimmer P1(delay), using a small screwdriver. The Elektrobock CS3-4B is powered by 230 V / 50 Hz. No neutral wire is required for installation. It boasts an adjustable time from 1 to 1,200 minutes. You will appreciate the IP20 protection rating. The Electrobock CS3-4B operates at temperatures ranging from 0 to 50 °C.
Key features of Elektrobock CS3-4B time switch
- Elektrobock CS3-4B timer is designed for switching fans
- It can be mounted under the switch
- Can delay fan on and off depending on lighting
- 230 V is required to power the Elektrobock CS3-4B time switch
- No neutral wire required for installation
- Appreciate the IP20 degree of protection
- Elektrobock CS3-4B timer is adjustable from 1 to 1 2000 minutes
Resistance load:
15 to 200 W
Inductive load:
15 to 100 VA
Power consumption:
1 W
Clamping element:
Triac
Collateral:
FU 2 A/ H 5 × 20 mm
Specifications
Use
Male connectors
Connector
Cable construction
Features
Input voltage
Special functions
Design
Control
Power outlet type
Elektrobock MTF s.r.o., Blanenská 1763/30, Kuřim 664 34, Česká Republika, +420 541 230 216, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.

