FSP Fortron FSP200-50GSV-5K
Don't like the alternatives? Choose from the full product list
FSP Fortron FSP200-50GSV-5K
The Fortron FSP200-50GSV-5K is SFX format and can be loaded up to 200 watts. The maximum possible efficiency is ensured by active PFCs. This is up to 85% (82% at maximum load) for this source, giving you 80 Plus Bronze certification. Cooling takes care of a 60mm silent fan.
To connect the components, you can find, in addition to the 20 + 4pin cable for the base plate, a 4-pin power connector for the processor. Two SATA cables are available for HDD/SSD, or optical drives. Also, 4pin Molex must not be missing, and those who use floppy disk drive do not need to worry about connections. The power cord is not included.
In the source there are circuits that protect both the source itself, and the components connected to it. This is overvoltage and current protection.
Parameters and Specifications:
Basic information:
Power: 200 W
Efficiency: 80 plus Bronze certification (typical 82% efficiency)
PFC: active
Cooling:
Fan: 60 mm
Load:
+3.3 V - 14 A
+5 V - 16 A
+12 V1 - 17 A
-12 V - 0.3 A
+5 Vsb - 2.5 A
Protection:
OVP (Over Voltage Protection) - Overvoltage protection
OCP (Over Current Protection) - Current protection
Connectors:
1x power ATX 20 + 4 pins
1x ATX12V 4 pins
2x Molex
2x SATA
1x FDD
Dimensions:
125 x 63.5 x 100 (width x height x depth)
©
Specifications
Power outlet type
Performance and format
Equipment
Efficiency
Connectors
Cooling system
Carl-Friedrich-Benz-Straße 13, 47877 Willich, GERMANY, https://www.fsp-group.com/en/index.html, +49 2154 894 012, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
